Swim & Fun

KlarPool 1L

1716
KlarPool which effectively prevents the growth of surface film on the inside of the pool

Description

KlarPool effectively prevents deposits from forming on the bottom and sides of the pool. Spores from microorganisms are transported through the air, and inevitably enter the pool water. The surrounding environment – high temperatures, excessive rain and extensive pool activity – also affects the development of deposits in the pool.

Start dosage: Add 1 dl KlarPool per 10,000 litres of water.
Preventive dosing: Add 0.5 dl KlarPool per 10,000 litres of water each week.

Healthy pool water has a pH value of between 7.0 and 7.4. To get the best use out of our water care products, make sure you maintain a healthy water balance. If the pH value of the pool water is not within this range, adjust it, using pH-Plus and pH-Minus, respectively.

Instructions for use: First, mix KlarPool with water in a clean plastic container. Then add the solution along the edge of the pool. After extensive swimming, high temperatures after storms, we recommend a higher dosage. Never mix with other chemicals. Please note that chlorine consumption can vary depending on water temperature, the frequency and duration of swimming, and the weather. 
 

If the problem has already occurred:
If there are deposits on the bottom and sides of the pool, you must first disinfect the water with a shock treatment of either Hurtigklor (1701) or OxyChock (1784) prior to using KlarPool.

Use the lid as a measuring cup:
The lid of this product acts as a measuring cup, so you can easily and accurately measure the correct amount.
Store the product in the original packaging, out of the reach of children, in a frost-free place and away from direct sunlight.

Biocides should be used with caution. Read the label and instructions for use before using the product.

1716_SF_KlarPool_Guide-UK.jpg